Asphalt Paving Atlanta

We are here to help as your preferred asphalt contractor

The goal of Woodstock Asphalt Paving & Sealcoating is to provide you with the best paving services available in the Woodstock Ga area. We have a lot of experience in this field and are known for providing timely, high-quality, and dependable services. We have a staff of skilled, competent, and experienced paving experts who know everything there is to know about the job.

We are in charge of the entire process from start to completion. In fact, we want to assist our customers in making the best decision possible by giving them enough information about paving before we begin the process. We recognize that no one enjoys spending money on parking lots or driveways, which is why we are here to explain why our recommendations are necessary and give you the best options available.

What is Asphalt Resurfacing?

Asphalt resurfacing is the process of placing new asphalt on top of an old asphalt or concrete surface. This is one of the greatest ways to keep a driveway or pavement looking good and lasting a long time. When compared to replacement or Asphalt Restoration, resurfacing existing asphalt is unquestionably a more cost-effective solution.

If your driveway has difficulties like these, consider asphalt resurfacing.

• Staining and mold
• Due to excessive traffic, there are a few small cracks.
• Sunlight or uneven shade causes discoloration in the asphalt surface.
• Due to surface dips, there is a problem with water pooling (Pooled water can further damage the lower layers of the asphalt)



It's also crucial to inspect the lower layers of an asphalt driveway for problems. Resurfacing using a new layer of asphalt on top of an already damaged one may not be successful.

Resurfacing normally involves adding 1-2 inches of asphalt to the surface and correcting structural issues.

What is Sealcoating?

To put it simply, asphalt pavement is made up mostly of rock, stone, and gravel, as well as a binder. This binder, sometimes known as asphalt cement, holds the rock, or aggregate, together. The binder is made from various crude oils that have been distilled. Maintaining this binder is critical for preventing asphalt surfaces from deteriorating. Rain, ultraviolet radiation, and chemicals, when injected into the asphalt, will destroy the binder, causing the asphalt to disintegrate. This will continue, resulting in a brittle surface.  It is critical to execute a maintenance program that includes sealcoating to lessen the effects of these elements and to extend the life of your parking lot or driveway.

Sealcoating will add a layer of protection against the elements, such as water, oils, and UV rays. Sealcoating also provides a slip-resistant surface with a rich black finish that beautifies the parking lot or driveway when applied according to manufacturer's standards. Sealcoats are typically acrylics or bituminous-based compounds. One of the foregoing emulsions is blended with water, silica sand, polymer additives, and additional proprietary fillers and solids to make a liquid sealcoat. Brush, spray, or squeegee can be used to apply these items. A regular sealcoating program will more than double the asphalt's life expectancy, saving you money in the long run.  Rather of spending thousands of dollars on new pavement, it is more cost effective to maintain it for pennies on the dollar per square foot.

Follow the critical measures outlined below when applying a sealcoating solution to ensure maximum protection and performance:

• At the very least, two coats should be applied.
• Temperatures must be at least 50 degrees Fahrenheit and increasing for at least 24 hours.  When temperatures are expected to drop below 50 degrees, do not apply.
• Do not use if rain is expected within the next 24 hours.
• Allow 24 hours for the sealcoat to cure after it has been applied before permitting vehicle traffic back on the surface.

To summarize, sealcoating your asphalt pavement every two to three years will significantly increase its life at a low cost. Sealcoating reduces oxidation, stops weather damage, and improves the appearance of pavement when applied correctly and at the right time.

If you have any questions about sealcoating or any other pavement maintenance or equipment needs, call Woodstock Asphalt Paving & Sealcoating.

Is Asphalt Crack Sealing Effective?

Even the greatest asphalt pavements will ultimately develop cracks, despite its resilience. The pavement can crack over time as a result of UV radiation and frequent freeze/thaw cycles. If the craftsmanship or materials used were subpar, cracks could appear early in the pavement's life. Premature cracking can also suggest that the pavement isn't being subjected to higher loads or traffic volumes than it was designed to handle. If not addressed, water will swiftly reach and destroy the foundation, jeopardizing the entire structure's stability and hastening the deterioration of the pavement.  Asphalt pavement cracks can be repaired in two ways by paving companies. Asphalt crack sealing and crack filling are two of these services. Despite the fact that many people use these names interchangeably, these are two distinct ways for dealing with different sorts of cracks. Both approaches are extremely cost-effective for preventing water penetration and extending the life of the pavement, but the contractor must select the appropriate formula for the specific pavement.

Crack Sealing is a Crucial Part of a Pavement Preservation Plan.

Sealcoating and crack filling are part of a routine pavement maintenance program that will more than double the life of your asphalt pavement while also improving curb appeal. Repairing or replacing asphalt pavement is much more expensive than sealcoating and crack filling. The key to successful crack filling and sealing is to repair and fill cracks while they are still minor, as crack filling prevents new fractures from emerging.

Moisture Intrusion is the leading cause of pavement failure, and crack sealing provides superior protection against it.

If cracks are not closed, rain and moisture will travel through the pavement, eroding the basic components and eventually causing potholes and pavement breakdown. Filling cracks with crack filler helps keep rain and moisture out of the pavement, preventing erosion and collapse. The rate of deterioration of the pavement is greatly reduced by preventing water from entering. Crack sealing also inhibits aggregate loss around the crack's edges.

What are the types of Asphalt Maintenance?

Preventive Maintenance:

Work done to improve or extend a pavement's functional life. It's a set of surface treatments and procedures aimed at delaying progressive failures and lowering the requirement for routine maintenance and repair.

Corrective Maintenance:

When a deficit in the pavement occurs, such as lack of friction, moderate to severe rutting, or widespread cracking, corrective maintenance is performed. This type of maintenance is also known as "reactive" maintenance.

Emergency Maintenance:

This is done in the event of an emergency, such as a blowout or a serious pothole that needs to be repaired right away. This term also refers to treatments that are used to keep the surface together until more permanent repairs can be made.

We provide the following pavement marking services:

• New parking lot layout
• Re-stripe parking lot
• ADA Compliance Marking
• Structure Marking

Parking lot striping

We take pleasure in our meticulous attention to detail, punctuality, and ability to deliver layout, design, and craftsmanship that can only be achieved through years of experience. Our technicians will increase the number of stalls in your parking lot, improve ADA compliance in parking spaces, and finish the job as quickly as possible so that your parking lot may reopen. To ensure that your job is performed on time, on budget, and to the highest quality standard, we employ the highest quality striping equipment and supplies in the market.

Striping Services

We take pleasure in our meticulous attention to detail, punctuality, and ability to deliver layout, design, and craftsmanship that can only be achieved through years of experience. Our technicians will increase the number of stalls in your parking lot, improve ADA compliance in parking spaces, and finish the job as quickly as possible so that your parking lot may reopen. To ensure that your job is performed on time, on budget, and to the highest quality standard, we employ the highest quality striping equipment and supplies in the market.

ADA Handicap Marking

We use state-of-the-art striping equipment for everything from parking lot striping to parking lot paint, striping layout redesign, curb painting, parking lot stencils, and ADA compliance striping. Our striping workers work around your schedule, whether it's weekends or nights, resulting in minimal inconvenience for both you and your customers.

When it comes to installing a new driveway, you will have a number of choices. Asphalt, gravel, concrete, and pavers, to name a few, are some of the most typical driveway materials. However, there is another option, the tar and chip driveway, that you may not be aware of. In order to make an informed decision, it's vital to understand that the typical cost might range from $2 to $5.

This is also a popular choice among homeowners, and you may have driven miles over it without knowing realizing it was a tar and chip surface. So, let's take a look at what this style of driveway entails and the key characteristics that surround it.

What is a tar & chip driveway?

Tar and chip driveways are a low-cost alternative to asphalt. They are also known as chip-and-seal, seal chip, macadam, or liquid-asphalt-and-stone driveways. The surface of this mixture of hot liquid asphalt and stone chips is more substantial than pure gravel. The procedure is pouring molten, hot tar over a gravel base to create a thin asphalt foundation. Then, on top of it, layers of crushed, loose stones are compacted. Finally, you're left with a dramatic driveway with a rough texture. Furthermore, the crushed stones can be customized to complement your surroundings. A tan or brown tint, for example, is suitable for a desert area, but grey stones work well in a wooded setting.  It is also stable due to the compacted stone surface, giving a smooth, bump-free ride.

In Summary

If you were unfamiliar with the term before reading this post, you now understand the fundamentals of a tar and chip driveway. Decide if this alternative is better for you than an asphalt cement, asphalt driveway, or a gravel driveway after reviewing all of the qualities listed above. If so, get a good contractor and get started.

What is Asphalt Milling & why you need to consider it

Asphalt milling is a cost-effective option for restoring asphalt pavements and is frequently used as a substitute for complete demolition and repaving.

Grinding up an asphalt surface (anything from a couple of inches to a full-depth removal) to generate a smooth and even surface for repaving is part of the process.

Despite the fact that asphalt pavement is one of the oldest urban development methods still in use, asphalt milling is a relatively new procedure to the industry, having just been introduced in the mid-1970s. As the equipment has improved, it has become a viable technique for paving contractors to provide economical and long-term pavement restorations to businesses and communities.

The advantages of asphalt milling for commercial and municipal pavements will be discussed in this article.

Find out if asphalt milling is right for you

Asphalt milling has been one of the quickest, easiest, and most cheap ways for company owners and installation managers to maintain safe, attractive, and healthy pavements since it began over 30 years ago. Milling is often a better option than complete demolition or other costly pavement removal methods.

Woodstock Asphalt Paving & Sealcoating would be delighted to offer a free on-site examination if you're not sure if pavement milling is the correct choice for your property. Simply give us a call or fill out the contact form. We'd be happy to answer any questions you have or provide you with a free, no-obligation quote right now.

Roswell

Sandy Springs

Woodstock

We serve the following cities: Acworth, Alpharetta, Atlanta, Austell, Brookhaven, Canton, Cartersville, Dallas, Decatur, Doraville, Douglasville, Duluth, Dunwoody, East Cobb, Hiram, Johns Creek, Kennesaw, Lilburn, Mableton, Marietta, Milton, Powder Springs, Roswell, Sandy Springs, Stone Mountain, Suwanee, Tucker, Villa Rica, and Woodstock Ga.